Bare wire rubber insulation silicone split line hose
Product Description
Bare wire rubber Insulation silicone split line hose
Description
RUBNS-OLC Bare wire rubber insulation silicone split line hose design, ease of installation. Use silicon rubber material, anti-aging, corrosion resistance, with good resistance to corona resistance, high temperature performance, especially suitable for the protection of the bare wire. Bare wire rubber insulation silicone split line hose is widely used in substation protection works and railway catenary system, a significant effect in the cross-lines. Bare wire rubber insulation silicone split line hose
Technical Data
Serial No. | Properties | Unit | Standard Data | Test Results | Test Methods |
1 | Electrical Strength Test | kV/mm | ≥20 | 22 | GB/T 1408.1-2006 |
2 | Volume Resistivity | Ω·cm | ≥1×1014 | 2×1014 | GB/T 1410-2006 |
3 | Dielectric Constant | 2~3 | 2.3 | GB/T 1409-2006 | |
4 | Shore Hardness | A | 70±5 | 71 | GB/T 531 |
5 | Mechanical Properties | GB/T 528 | |||
5.1 | Before heat ageing | ||||
Tensile Strength | MPa | ≥4.0 | 5.5 | ||
Elongation at break | % | ≥200 | 243 | ||
5.2 | After Heat ageing(180℃, 7d) | % | ±30 | 13 | |
| Tensile Strength Change Elongation Change | % | ±30 | -22 | ||
6 | Low Temperature Elongation(-15℃, 2h) | % | ≥20 | 190 | GB/T 2951.4-1997 |
7 | Low Temperature Flexibility(-50℃, 4h) | - | No cracks | No cracks | UL224-2004 |
8 | High Temperature Crack Resistance(155℃, 2h) | - | No cracks | No cracks | GB/T2951.6-1997 |
Structure
Srtructure
Dimensions
Voltage Ratings/Wall Thickness
Voltage(KV) | ≤10KV | ≤35KV | ≤110KV | ≤220KV |
Thickness | 2.0±0.3mm | 2.6±0.4mm | 4.0±0.5mm | 6.0±1.0mm |
Installation Instructions
Clean the inside of the RUBNS-OLC with cleaning cloth and alcohol fluids until the inside is
clean without dust;
Connect the pointed plastic mouth to the body of RTV Silicone Rubber adhesive bottle. Seeillustration 1 above.
Smear RTV silicone rubber adhesive all over the concave channel of the RUBNS-OLC
uniformly as showed in illustration 2 above
Uniformly smear the two flat fringes of the concave channel with RTV silicone
rubber adhesive as the illustration 3 shows
Connect the bulging part of the RUBNS-OLC on one side into the concave channel of the
other side and squeeze the connecting part from one end to the other as illustration 4 indicates
Package Information
Company Show
They Trust Us
Contact us if you need more details on Insulation Silicone Split Line Hose. We are ready to answer your questions on packaging, logistics, certification or any other aspects about Insulation Silicone Split Line Hose、Insulation Silicone Split Line Hose. If these products fail to match your need, please contact us and we would like to provide relevant information.
Product Categories : Cable Accessories
Premium Related Products
