Cable Identification PE wire heat shrink tubing
Product Description
Cable Identification PE wire Heat Shrink Tubing
Description
MSVLA series, Cable Identification PE wire heat shrink tubing, is the military grade Cable and Wire identification sleeves, which is made of cross-linked environmentally friendly polyolefin bombarded by high-power electron beam with electronic accelerators to meet requirements of high end markets where highly reliable cable& wire identification is required. wire heat shrink tubing. It accords to Classes 1 and 3 of AMS-DTL-23053/5 half-hard high molecular materials. For this product, both 2:1 and 3:1 shrink ratio are available on your request. wire heat shrink tubing.
Features
² Military grade, lightweight, well suited for aerospace vehicles, tank, and submarines identification purposes
² High temperature resistant(temperature rating 135°C/275°F)
² Highly flame retardant, VW-1
² RoHS compliant
² Highly reliable and permanent identification
² Thermo-sensitive, quick recovery
² Computer-printable, any characters and logo are easy to design
² Continuous operating temperature: -55°C~135°C/-67°F~275°F
² Min. shrink temperature: 85°C/185°F
² Full recovery temperature: 115°C~200°C/239°F~392°F, 8~3minutes
² Max. storage and transportation temperature: ≤+50°C/122°F
² Meets AMS-DTL-23053/5, compatibility: UL224
² Color code soundness: SAE-AS 81531 and MIL-STD-202F/215J
Technical Data
Performance | Indicators | Test Method | ||
Typical properties | Unit | States | ||
Tensile Strength | Mpa | Unaged | ≥10.3 | ASTM G 154,MIL-DTL-23053E ISO 37,500mm/min 175°C,168h,ISO 188 |
Heat aged/ After fluids/UV aged | ≥6.9 | |||
Elongation at break | % | Unaged | ≥200 | |
Heat aged/ After fluid | ≥100 | |||
Secant Modulus | Mpa | Unaged | <173 | ASTM D 882 |
Voltage Withstand | V | Unaged / After aged | 2500V, No breakdown in 60 sec. | IEC 243,ASTM G 154 175°C,168h,ISO 188 |
Dielectric Strength | MV/m | Before aged | ≥19.7 | |
Heat aged/ After fluid/ UV aged | ≥15.8 | |||
Volume Resistivity | Ω.cm | Unaged | ≥1014 | IEC 93 |
Dielectric constant | - | Unaged | ≤3.1 | ASTM 150 |
Water Absorption | - | Unaged | ≤0.5% | ASTM 570,23°C,24h |
Bare Copper Corrosion | - | Unaged | No corrosion | 23°C,Rh 95±5%,24h 175°C,16h |
Heat Shock | - | Unaged | No cracks, flowing, dripping | Wind to the specified mandrel,225°C,4h |
Cold Flexibility | - | Unaged | No cracks | Wind to the specified mandrel,-55°C,1h |
Flammability | - | Unaged | VW-1 | IEC 60332-1-3 Ed.1.0 b:2004 |
Longitudinal Change | % | Unaged | 2X:-10~+1 | 200°C,Constant 3min |
3X:-15~+5 | ||||
Smoke Density | - | Unaged | - | DIN 5510-2 |
Toxcity Index | - | Unaged | - | BS 6853:1999 |
Contact us if you need more details on Wire Heat Shrink Tubing. We are ready to answer your questions on packaging, logistics, certification or any other aspects about High Quality Wire Heat Shrink Tubing、PE Wire Heat Shrink Tubing. If these products fail to match your need, please contact us and we would like to provide relevant information.
Product Categories : Identification Marker