Flame Retardant Heat Shrinkable Identification Sleeves VW-1
Product Description
Flame Retardant Heat Shrinkable Identification Sleeves VW-1
Description
MSVLD(DIN) series, Flame Retardant Heat Shrinkable Identification Sleeves VW-1, is the halogen free, low smoke, highly flame retardant Cable and Wire identification sleeves, which is designed to meet the requirements of EMU for high-speed rails, subways and motor train units. It is made of the polyolefin by means of bombarding and cross-lining of high energy electron beam. Flammability, smoke density, toxicity index, electrical, physical and chemical performances conform to the standards of international motor vehicles. The printed characters are amazingly abrasion resistant, even if the words have encountered detergent or corrosion of military oil before and after shrinking. The soundness of words conforms to the requirements of SAE-AS 81531 and MIL-STD-202F/215J and keeps permanent identification.
Heat Shrinkable Identification Sleeves Heat Shrinkable Identification Sleeves Heat Shrinkable Identification Sleeves
Features
² Halogen free low smoke emission materials, designed ideally for motor train unit, rail transit, aerospace, and shipbuilding industrials
² Standard temperature resistance, rated temperature 125°C
² Highly flame retardant, low smoke emissive; meets international locomotive relevant standards
² ROHS compliant; meets SONY SS-00259
² High reliability, permanent identification
² Heat sensitive, swift recovery
² Computer printable, any characters and logo are easy to design
² Continuous operating temperature: -55°C~125°C/-67°F~257°F
² Min. shrink temperature: 85°C/185°F
² Full recovery temperature: 115°C~200°C/239°F~392°F, 8~3minutes
² Max. storage and transportation temperature: ≤50°C/122°F
² Raw material Standards: ASTM D 2671/DIN5510-2
² Color code soundness: SAE-AS 81531 and MIL-STD-202F/215J
² British and French Smoke Poison Standards: BS 6853/NF F 16-101
Heat Shrinkable Identification Sleeves Heat Shrinkable Identification Sleeves Heat Shrinkable Identification Sleeves
Technical Data
Performance | Indicators | Test Method | ||
Typical properties | Unit | States | ||
Tensile Strength | Mpa | Unaged | ≥10.3 | ASTM G 154,MIL-DTL-23053E ISO 37,500mm/min 175°C,168h,ISO 188 |
Heat aged/ After fluids/UV aged | ≥6.9 | |||
Elongation at break | % | Unaged | ≥200 | |
Heat aged/ After fluid | ≥100 | |||
Secant Modulus | Mpa | Unaged | <173 | ASTM D 882 |
Voltage Withstand | V | Unaged / After aged | 2500V, No breakdown in 60 sec. | IEC 243,ASTM G 154 175°C,168h,ISO 188 |
Dielectric Strength | MV/m | Before aged | ≥19.7 | |
Heat aged/ After fluid/ UV aged | ≥15.8 | |||
Volume Resistivity | Ω.cm | Unaged | ≥1014 | IEC 93 |
Dielectric constant | - | Unaged | - | ASTM 150 |
Water Absorption | - | Unaged | ≤1.0 | ASTM 570,23°C,24h |
Bare Copper Corrosion | - | Unaged | No corrosion | 23°C,Rh 95±5%,24h 175°C,16h |
Heat Shock | - | Unaged | No cracks, flowing, dripping | Wind to the specified mandrel, 225°C,4h |
Cold Flexibility | - | Unaged | No cracks | Wind to the specified mandrel, -30°C,1h |
Flammability | - | Unaged | DIN 5510, S3 | DIN 5510-2 |
Longitudinal Change | % | Unaged | 2X: -10~+1 | 200°C,Constant 3min |
3X: -15~+5 | ||||
Smoke Density | - | Unaged | ≤0.017 | DIN 5510-2 |
Toxcity Index | - | Unaged | ≤1 | BS 6853:1999 |
Contact us if you need more details on Identification Sleeves. We are ready to answer your questions on packaging, logistics, certification or any other aspects about Heat Shrinkable Identification Sleeves、Silicon Rubber Heat Shrinkable Sleeve. If these products fail to match your need, please contact us and we would like to provide relevant information.
Product Categories : Identification Marker