heat shrink extruded teflon ptfe tube for wire insulation

heat shrink extruded teflon ptfe tube for wire Insulation

 

 

 

Description

 

 

heat shrink extruded teflon ptfe tube for wire insulation is made of superior quality polytetrafluoroethylene resin through special extrusion and sintering process. extruded teflon ptfe tube . This product is highly resistant to high temperature, high pressure, corrosion, abrasion and has excellent mechanical strength. It is widely used in mechanical, electronic, chemical and communications markets. extruded teflon ptfe tube .

 

 

Picture show

 

 

 

 

 

Features

 

 

1.Operating temperature: -65°C~260°C
2.Corrosion resistant to strong acid, strong base, chemical reagent, oil etc

3.Min. shrink temperature: 350°C
4.Shrink ratio: 1.7:1
5.Standard color: transparent 

 

 

Physical

 

 

Properties	Typical Data	Test Method
Tensile strength	19MPa	IEC 811-1-1
Elongation at break	200%	IEC 811-1-1
Longitudinal change	≤15%	ASTM D 2671
Tangent coefficient	≤750MPa	ASTM D 822
Gravitation	2.1g/cm	ASTM D 792
Anti-ageing in high temperature	No dropping,no flowing,no cracking	IEC 811-1-2
Adaptability to low temperature	No cracking at -65°C	ASTM D 2671 Meth.c
Flammability	Self-extinguishing	ASTM D 2671

 

Electrical& Chemical

 

Properties	Typical Data	Test Method
Dielectric strength	26kv/mm	VDE 0303 Part2
Volume resistivity	≥1016Ω.cm	VDE 0303 Part2
Corrosion resistance	No corrosion	ASTM D 2671 A
Compatibility	No corrosion	ASTM D 2671 B
Chemical resistance	Good	SAE-AMS-DTL-23053/12
Water absorption	0.07%	VDEO 472

 

Dimension

 

 

 

SGS Certification

 

 

Contact us if you need more details on Extruded Teflon Ptfe Tube. We are ready to answer your questions on packaging, logistics, certification or any other aspects about Extruded Teflon Ptfe Tube、Extruded Teflon Ptfe Tube. If these products fail to match your need, please contact us and we would like to provide relevant information.

Product Categories : Ptfe Tubing