7.0mm heat shrink ptfe tubing

7.0mm heat shrink Ptfe Tubing

 

Description

 

1.7:1 shrink ratio PTFE Teflon Heat Shrink Tubing is made of superior quality polytetrafluoroethylene resin through special processing technology. This product is highly resistant to high temperature, high pressure, corrosion, abrasion and has excellent mechanical strength. It is widely used in mechanical, electronic, chemical and communications markets.

 

Features

 

.Operating temperature: -65°C~200°C
.Corrosion resistant to strong acid, strong base, chemical reagent, oil etc

.Min. shrink temperature: 350°C 
.Shrink ratio: 1.7:1
.Standard color: transparent

 

Physical

 

Properties	Typical Data	Test Method
Tensile strength	19MPa	IEC 811-1-1
Elongation at break	200%	IEC 811-1-1
Longitudinal change	≤15%	ASTM D 2671
Tangent coefficient	≤750MPa	ASTM D 822
Gravitation	2.1g/cm	ASTM D 792
Anti-ageing in high temp.	No dropping,no flowing,no cracking	IEC 811-1-2
Low temp. adaptability	No cracking at -65°C	ASTM D 2671 Meth.c
Flammability	Self-extinguishing	ASTM D 2671

 

Electrical & Chemical Property

 

Properties	Typical Data	Test Method
Dielectric strength	26kv/mm	VDE 0303 Part2
Volume resistivity	≥1016Ω.cm	VDE 0303 Part2
Corrosion resistance	No corrosion	ASTM D 2671 A
Compatibility	No corrosion	ASTM D 2671 B
Chemical resistance	Good	SAE-AMS-DTL-23053/12
Water absorption	0.07%	VDEO 472

 

Company Show

 

 

 

skype:volsun-eric

tel:86-512-66386808/86-15252086895 

Contact us if you need more details on Heat Shrink Ptfe Tubing. We are ready to answer your questions on packaging, logistics, certification or any other aspects about Teflon Heat Shrink Ptfe Tubing、Resistant Plastic Heat Shrink Ptfe Tubing. If these products fail to match your need, please contact us and we would like to provide relevant information.

Product Categories : Ptfe Tubing