Plastic wire sleeving

 Plastic wire sleeving 

 

 

Description

 

Plastic wire sleeving, made of radiation cross-linked polyolefin, has excellent physicochemical and electrical properties.  Plastic wire sleeving. It can reliably insulate Cable and Wire splices and terminations, effectively protect soldered joint and provides good mechanical protection for wire harness in electronic, communications, automotive, shipping and aircraft manufacturing industries.  Plastic wire sleeving.

 

 

 

 

Plastic wire sleeving Features

.Meets UL 224, CAN / CSA C22.2 NO198.1 -99
.Heat shrink ratio: 2:1
.Highly flame retardant , environmentally friendly
.Min. shrink temperature : 84 °C
.Min. full recovery temperature : 120 °C
.Continuous operating temperature : -55 °C ~ 125 °C
.RoHS Compliant
.Standard Colors: black, white, red, yellow, green, blue and other four international standard colors. More colors are available upon request

 

 

Plastic wire sleeving
Technical Data

 

Properties	Typical data	Test method
Tensile strength(MPa)	≥10.4MPa	ASTM D 2671
Elongation(%)	≥300%	ASTM D 2671
Tensile strength after heat ageing(MPa)	≥7.3MPa	158°C×168h
Elongation at break after heat ageing(%)	≥100%	158°C×168h
Longitudinal change(%)	-8%~+8%	ASTM D 2671
Flammability	Self extinguish in 30 sec.	AMS-DTL-23053/5
Dielectric strength	≥15kv/mm	IEC 60243
Volume resistivity	≥1014Ω.cm	IEC 60093

 

 

Plastic wire sleeving Dimensions

 

 

 

Plastic wire sleeving Factory Show

 

 

 

Plastic wire sleeving LAB.

 

  

 

 

Contact us if you need more details on Plastic Wire Sleeving. We are ready to answer your questions on packaging, logistics, certification or any other aspects about Plastic Wire Sleeving/ Shrinkable Tube、Polyolefin Plastic Wire Sleeving. If these products fail to match your need, please contact us and we would like to provide relevant information.

Product Categories : Single Wall Heat Shrink Tubing