36KV Busbar Support Insulators Heat Shrink Tubing
Product Description
36KV Busbar Support Insulators Heat Shrink Tubing
l Description
36KV Busbar Support Insulators Heat Shrink Tubing, made of radiation cross-linked polyolefin, has excellent physicochemical and electrical performance. For 36KV Busbar Support Insulators Heat Shrink Tubing, Typical applications include Insulation of electrical busbar with 10KV or lower voltage ratings, rectangular, square and round busbars, inline bolted connections of rectangular bus bars, copper or aluminum bus bars, metal-clad switchgear, metal-enclosed bus bar, substation switchgear etc.
l Features
² Meets:GB/T 1059-2007
² Shrink ratio: 2:1
² Tracking resistant, low smoke emitting, high strength, flexible, flame retardant
² Min. shrink temperature: more than 84degree
² Min. full recovery temperature: more than 120degree
² Continuous operating temperature: more than -55~125degree
² RoHS compliant
² Standard colors: Red, yellow, green and other colors available on your request
l Technical Data
Properties | Typical Data | Test Method |
Tensile strength | ≥8.0MPa | ASTM D 2671 |
Elongation at break | ≥300% | ASTM D 2671 |
Tensile strength after heat ageing | ≥6.9MPa | 130°C×168h |
Elongation after heat ageing | ≥100% | 130°C×168h |
Longitudinal change | -8%~+8% | ASTM D 2671 |
Oxygen index | ≥28 | GB/T 2406 |
Heat Shock | No cracking | JB 7829supplement D |
Dielectric strength | ≥20kv/mm | ASTM D 149 |
Shore A Hardness | ≤90 | GB 2411 |
Volume resistivity | ≥1014Ω.cm | IEC 60093 |
l Structure
l Dimension
Application
SGS Certification
Factory Show
Contact
Contact us if you need more details on Busbar Support Insulators. We are ready to answer your questions on packaging, logistics, certification or any other aspects about 36KV Busbar Support Insulators、Busbar Support Insulators Heat Shrink Tubing. If these products fail to match your need, please contact us and we would like to provide relevant information.
Product Categories : Single Wall Heat Shrink Tubing
Premium Related Products